Chapter 3: Programming
CHAPTER 3:
PROGRAMMING
This chapter describes use of the keypad and explains the keypad commands for programming the Boat Remote. You will
learn how to program Voice Messages, System Parameters, Phone Parameters, and Input Alarm Parameters.
Using the Keypad, LCD and LED Indicators
The keypad is used to program and access information from the Boat Remote. All programming is accomplished using simple key sequences and entering information with the number keys. Moving through menu options is performed with the arrow keys. To change a parameter, enter the new value and press the ENTER key.
The LCD, liquid crystal display, indicates which menu option has been selected and the current selected parameter.
The two LED’s are used to indicate the system operating mode and alarm status of the Boat Remote. The MODE LED indicates the system operating mode of the Boat Remote. The WARNING LED alerts you if there is a problem with the phone line, AC power or if an alarm exists. The following describes the LED indicators:
MODE LED - GREEN
Off =
Blinking =
On Steady = Away Mode
WARNING LED - RED Off = Everything OK Blinking = Unacknowledged Alarm Exists
On Steady = AC Power Off or Phone Line Disconnected
Fig. 3.1 The Keypad
25
