Boat Remote User’s Manual
Fig. 2.7 Connection to the Auxiliary Input
Output
The Boat Remote features a switched 12V output signal that can be used to turn on a siren or strobe light when an alarm occurs. The power for the output is derived from the boat battery. This allows the output to function in the event of a power failure. The figure below shows how a strobe light would be connected to the output terminal. The negative terminal from the light or siren must connect to the boat ground (or the negative terminal of the boat battery). The output can be programmed to trip if any alarm occurs or if the security alarm only occurs. See Chapter 3 for programming the output.
Fig. 2.8 Connecting a Strobe Light to the Output
24
