Turn the iris ring to 1.4 (open).

When you use the VCL-614WEA zoom lens

You do not need to use the FLANGE BACK (flange focal length) adjustment ring on the camera.

Note

Be sure to set the iris fully open before adjusting the flange focal length.

1 Point the camera to an object at the desired shooting distance or about 3 m (10 feet) away.

Chapter

Desired shooting distance to the object or about 3 m (10 feet)

1

65, 6

3

4, 5, 8

2 Set the FOCUS, ZOOM, IRIS M/A switches on the lens to M (Manual) position using a pointed object.

3

4 Turn the fixing screw for the F.f adjustment ring counterclockwise to loosen it.

5 Turn the ZOOM ring clockwise to align 5.5 (wide- angle) with the white line, then turn the F.f adjustment ring by holding the F.f fixing screw to adjust the focus on the object used in step 1.

2

2, 9

6 Turn the ZOOM ring counterclockwise to align 77 (telephoto) with the white line, then adjust the focus on the object.

Object, such as letters, fine patterns, etc., on which you can observe the focus condition distinctly

OPERATION MODE

FOCUS ZOOM IRIS MyA MyA MyA

FOCUS

ZOOM

IRIS

7 Repeat steps 5 and 6 until you achieve sharp focus both in the telephoto and wide-angle positions.

8 Turn the fixing screw for the F.f adjustment ring clockwise to tighten it firmly.

9 Set the FOCUS, ZOOM, IRIS M/A switches on the lens to A (Auto) position.

Now the flange focal length adjustment is completed. You do not need to readjust the flange focal length unless you replace the lens.

Chapter 2 Operation 33 (GB)