LINEAR MATRIX
Processes an image with a color matrix to change the chroma saturation and hue in order to reproduce natural color.
Selection | Function |
|
|
ON | Corrects the color to reproduce natural color. |
|
|
OFF | Color correction does not function. Use when you want |
| to process the image. |
|
|
When you set LINEAR MATRIX to ON, MODE is displayed. You can adjust the color suitable for an object. When you set MODE to MANUAL, R. PAINT, G. PAINT and B. PAINT appear.
Selection | Function |
STANDARD | Normally, select this setting. |
|
|
R ENHANCE | Enhances the red. |
|
|
B ENHANCE | Enhances the blue. |
|
|
G ENHANCE | Enhances the green. |
|
|
MANUAL | Adjusts each color finely. |
| R. PAINT: Finely adjusts the red in the range from |
| to +30. |
| G. PAINT: Finely adjusts the green in the range from |
| |
| B. PAINT: Finely adjusts the blue in the range from |
| |
|
|
TARGET COLOR
Select when adjusting DETAIL or LINEAR MATRIX for a specific color.
Selection | Function |
|
|
ALL | Adjusts DETAIL or LINEAR MATRIX for the whole |
| image. Normally, set to this position. |
|
|
IN | Adjusts DETAIL or LINEAR MATRIX for a specific |
| color. |
| With the RANGE setting you can finely adjust the area |
| in the range from |
|
|
OUT | Adjusts DETAIL or LINEAR MATRIX for colors other |
| than a specified one. |
|
|
How to specify a color
1 Select IN or OUT and press the ENTER button.
2 Move the cross cursor () appearing in the center of the screen to the desired color with the B, b, V or v button so that the cross cursor square covers the desired color, then press the ENTER button.
When you select IN, you can adjust the color indicated by the cross cursor ().
When you select OUT, you can adjust colors other than that with the cross cursor.
2 Chapter
Chapter 2 Operation 25 (GB)