19
The SET SETTING Menu
Adjustments and Settings Using a Menu
The SET SETTING Menu

The SET SETTING menu is used for setting various functions of the projector.

*1: Executes APA when a computer signal is input via the RGB input connector (INPUT A).
*2: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Dot
Phase,” “H size,” and “Shift” items manually.
*3: The image may not be adjusted pro perly depending on the type of input signal. In such a case,
adjust it manually to suit to the connected equipment.
Items Item descriptions
Smart APA On/Off: When set to “On,” executes APA automatically when a signal is
input.*1 *2
Auto Input Search On/Off: When set to “On,” the projector detects input signals in the
following order: Input-A/Input-B/Video. It indicates the input channel
when the power is turned on or the INPUT key is pressed.
Input-A Signal Sel. Auto/Computer/Component/Video GBR: When set to “Auto,” selects
the type of video signal input automatically when “Input-A” is selected
with the INPUT key.*3
Color System Auto/NTS C3.58/PAL/PAL-60/SECAM/NTSC4.43/PAL-M/PAL-N: When
set to “Auto,” selects the color system automatically when “Video” is
selected with the INPUT key.*3
Power Saving Mode Off: The Power Saving Mode is canceled.
Lamp Cutoff: The lamp turns off automatically and power consumption is
reduced if no signal is input for 10 minutes. The lamp lights again when a
signal is input or any key is pressed. In Lamp Cutoff, the ?/1 key lights in
orange (page23).
Standby: The power will be turned off automatically and the projector
goes to Standby mode if no signal is input for 10 minutes.
Panel Key Lock On/Off: When set to “On,” locks all the control panel keys of the projector.
However, you can operate the following when set to “On”:
• Press and hold the ?/1 key for approximately 10 seconds dur ing Standby
mode.
cThe projector turns on.
• Press and hold the ?/1 key for approximately 10 seconds during power
on.
cThe projector goes to Standby mode.
• Press and hold the MENU key for approximately 10 seco nds during
power on.
c“Panel Key Lock” is set to “Off” and enables operation of all keys on
the projector.
CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (Captions or Text).
Off: Closed caption does not appear.
Lamp Timer Reset When replacing the lamp, resets the lamp timer (page27).
Note