Canon MV4i MC instruction manual Press and hold the REMOTE SET button on the wireless controller

E

When Operating 2 Canon DV Camcorders (Remote Sensor Mode)

To prevent interference from other

Canon wireless controllers being used	ZOOM
	T
W
nearby, there are 2 remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
REMOTE
compatible.
SET

The wireless controller and the camera have been preset to mode 1. If you change the mode on the camera, be sure to change the mode on the wireless controller to the same mode.

Using the Full Range of Features

MOVIE	P.SCAN PLAY (	VCR )	CARD	CARD
			R E C	PLAY

SYSTEM

( 34)

To turn the remote sensor off:

WL.REMOTE•••1

A 1	: Mode 1
A 2	: Mode 2

OFFB : Sensor off

Open the menu and select SYSTEM. Then select WL.REMOTE, set it to OFFB and close the menu.

• B appears in the display.

To change the mode...

...on the camera:

Open the menu and select SYSTEM. Then select WL.REMOTE, set it to A 1 or A 2 and close the menu.

• The selected mode will appear on the display for 4 seconds.

...on the wireless controller:

Press and hold the REMOTE SET button on the wireless controller.

Simultaneously press the ZOOM W button for mode 1 or the ZOOM T button for mode 2. Continue to press simultaneously for over 2 seconds.

• Be sure to set the wireless controller to the same mode as the camera.

44