Panasonic CF-VDW07HM, CF-VDW07M AdHoc Mode Configuration, Get the Information You Need

AdHoc Mode Configuration

Setup the Wireless Display in AdHoc Mode

NOTE

Before setting up the Wireless Display with your computer, please make sure your computer is wireless LAN ready. Meaning that your computer is equipped with a properly functioning 802.11b wireless network card.

CAUTION

If your computer has firewall protection software installed (ie. Black-Ice or ZoneAlarm), please disable the firewall since it might prevent the Wireless Display from establishing connection with your computer. Please consult with your system administrator on how to configure your firewall software.

I Get the Information You Need:

1.Insert the battery into the Wireless Display, connect the Wireless Display to a power outlet, and turn on the Wire- less Display.

2.For a Wireless Display that has never been configured before, the following screen will appear on the display. If a different screen appears on your display, please follow step 3 to get to this screen; otherwise, please skip to step 6.

<Wireless display screen>

Select network type.

AdHoc Infrastructure Cancel

3.Press the MENU button on the Wireless Display. The following screen is displayed.

General Wireless		Battery	Option	Version
Mode :	Connect		OfflineView
Backlight :	LOW	MID	HIGH
Profile:	Profile 1
81%			OK	Cancel

Power Switch

Menu Button

3 Panasonic Wireless Display Configuration Manual