AdHoc Mode Configuration
NOTE
The Wireless display can not connect to the computer if the password is entered incorrectly.
The user can change the password after the initial connection is estab- lished. The new password will be updated automatically in the "Password" field on the system tray.
22.The setting is completed. Select [Connect] on the Wireless Display. The display will attempt to establish connection with the computer. If the connection is successful, the MeiWDS icon in the "System Tray" will change from 
to
.
NOTE
Once the communication is established, the "Wireless Display Setup Utility" will be become accessible. User will then be able to launch the "Wireless Display Setup Utility", which can be used to modify the display's settings.
To access the utility:
Windows 2000
Click [Start] - [Programs] - [Panasonic] - [Wireless Display Setup Utility].
Windows XP
Click [Start] - [All Programs] - [Panasonic] - [Wireless Display Setup Utility].
NOTE
Windows XP
Windows XP's "Fast User Switching" function is not sup- ported by the Wireless Display. A warning message as shown on the right side will appear if the "Fast User Switching" function is enabled. Click [OK] to close the warning massage.
To disable the "Fast User Switching" function:
Click [Sart] - [Control Panel] - [User Accounts]. Click on "Change the way user log on or off". The following window will appear.
-Uncheck "Use Fast User Switching".
-Click [Apply Options].
-Close the "User Accounts" window.
-Close the "Control Panel".
9 | Panasonic Wireless Display Configuration Manual |
