Connections for Playback on a TV Screen
You can connect the camera to a TV or VCR in order to play back your recordings. You will need to attach a power source to the camera ( 
9). Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
E
Attaching the DU-300 Docking Unit
The
LOCKING SCREW
LOOSEN TIGHTEN
Mastering the Basics
1.Make sure that the camera is switched off.
2.Align the terminals of the docking unit and the camera.
3.Push the docking unit onto the camera and turn the locking screw clockwise to fix it securely onto the base.
•To remove, turn the locking screw anticlockwise and pull the docking unit from the base of the camera.
Attaching the Ferrite Core
Attach the enclosed ferrite core before you connect the
Attach the ferrite core to the cable about 5 cm from the plug end (the plug to be connected to the camcorder) of the
•Pass the cable through the centre of the core and wrap it around the core once, then close the unit until it clicks shut.
27
