E
Appears immediately after you start recording, and the video heads are badly contaminated. Make sure to clean the video heads when this caution appears.
HEADS DIRTY,
USE CLEANING CASSETTE
Appears if you have tried to mark 51 or more images for printing, or if a mark file cannot be edited.
( 
113)
A memory card has not been inserted
PRINT MARK ERROR
For MV4i MC only
An error has occurred with the memory card. The camcorder cannot record or play back. A temporary card
error is also possible. If CARD ERROR
disappears after 4 seconds and 
flashes red, turn the camcorder’s power off and back on again, and remove and reinsert the
card. If 
flashes green, recording or playing back is possible.
There is no more remaining memory on the memory card.
into the camcorder.
( 
99)
There are no images recorded on the memory card.
You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.
NO CARD
NO IMAGES
THE CARD IS SET FOR ERASURE PREVENTION
Change the card or erase images.
CARD FULL
Appears when you press the start/stop button in CARD REC mode. The
IN CARD POSITION
| You have reached the |
| ||
| maximum file or |
| ||
| folder number. | NAMING ERROR | ||
| ( |
| 101) | |
|
| |||
| The image has been |
| ||
| recorded in an | UNIDENTIFIABLE | ||
| incompatible JPEG | |||
| format or other | IMAGE | ||
| format that the |
| ||
| camera can not play |
| ||
| back, or the image |
| ||
Additional Information |
| |||
data has been |
| |||
|
| |||
damaged.
image isn’t recorded on the cassette or memory card.
