Auto ICR Mode
Auto ICR Mode automatically switches the settings needed for attaching or removing the IR Cut Filter. With a set level of darkness, the IR Cut Filter is automatically disabled (ICR ON), and the infrared sensitivity is increased. With a set level of brightness, the IR Cut Filter is automatically enabled (ICR OFF). Also, on systems equipped with an IR light, the internal data of the camera is used to make the proper decisions to avoid malfunctions.
When Auto Slow Shutter is OFF (initial setting)
|
|
|
|
|
|
| Shutter 1/60 sec | |
| AGC | IRIS | ||||||
ICR | MAX | OPEN | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| GAIN |
|
|
| IRIS | |
ICR ON |
|
|
|
|
| SHUTTER | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dark |
|
|
|
|
|
| Bright | |
ICR OFF t ON |
|
| ||||||
|
|
|
|
|
| |||
When Auto Slow Shutter is ON
Note
When in Auto_ICR_OFF state and WB data is added (default), a malfunction may occur when the subjects largely consisting of blue and green colors are taken.
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this will be memorized in the nonvolatile memory inside, data will be saved regardless of whether it has been backed up.
Basic Functions
Effect
It consists of the following functions.
•Neg. Art: Negative/Positive Reversal
•Black White: Monochrome Image
Others
This function turns the video output from the camera upside down.
Mirror image
This function reverses the video output from the camera horizontally.
Freeze
This function captures an image in the field memory of the camera so that this image can be output continuously.
Because communication inside the camera is based on V cycle, the captured image is always the one 3V to 4Vs after the sending of a Command. Thus, you can not specify a time period after sending EVEN, ODD or a Command.
Memory (Position preset)
Using the position preset function, 6 sets of camera shooting conditions can be stored and recalled.
This function allows you to achieve the desired status instantly, even without adjusting the following items each time.
•Zoom Position
•Digital Zoom On/Off
•Focus Auto/Manual
•Focus Position
•AE Mode
•Shutter control parameters
•Bright Control
•Iris control parameters
•Gain control parameters
•Exposure Compensation On/Off
•Exposure Level
•Backlight Compensation On/Off
•Slow Shutter Auto/Manual
•Slow AE Response speed
•White Balance Mode
•R/B Gain
•Aperture
•ICR Shoot On/Off
Custom Preset
As with the positon preset function, the camera shooting conditions can be stored and recalled. The settings are recalled when the power is turned on. For setting items, see the “Initial Settings, Custom Preset and Backup” section on page 23.
11