SPECIFICATIONS
TV standerd | American TV standerd | Power requirements | 4.5 V DC |
Channel converage |
| Power consumption | Approx : 2.9W |
| VHF : | Speaker | Ø28 mm (1 1/8 in.), 0.1 W |
| UHF : | Temperature range | 32 ˚F - 104 ˚F (0 ˚C - 40 ˚C) |
Antenna | VHF/UHF strap antenna | Dimensions | Approx. 91x109x64mm (w/h/d) |
Display format |
|
| (3 5/8 x 4 3/8 x 2 5/8 in.) excl. |
| Transmission type TN liquid crystal |
| Projecting parts and controls |
| panel | Strap length | Approx. 1,300 mm (51 1/4 in.) |
Drive format | Passive matrix | Mass | Approx. 230 g (8.1 oz), excl. batteries |
Picture | 2.2 inches measured diagonally |
|
|
Output | Headphones : minijack | Design and specifications are subject to change without notice. | |
| Impedance 8 - 45 ohms |
|
|
Optional accessories
AC power adaptor
COMPONENTS IDENTIFIED BY SHADING AND MARK Á ON THE
SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS AP-
PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
– 2 –
