SECTION 2
DISASSEMBLY
2-1. CABINET REMOVAL
1.Remove battery cover 8.
2.Push the two hooks in the lower section of the rear cabinet with
a pint and the like to undo them.
2Channel button
1Screw
Hooks | (+P2 x 10) |
3. While pressing the rear cabinet, undo hooks on the periphery.
4. Insert a pin into the upper side of the cabinet, and while push- ing the hook, tilt the pin to the rear cabinet side.
5.Remove the channel button 2.
6. Remove the speaker cord from the connector.
7. Remove B board 3 and A board 4.
8. Remove one screw 6 (+P x 10) from T board 5.
9. Remove T board 5 from the hooks (one each on both side) on the rear cabinet.
Front cabinet
Rear cabinet
1Front cabinet assy
3B board
4A board
5T board
Claw
7Rear cabinet assy
8Battery cover
– 6 –
