Sony FR 20 Turning headset on and off, Use with desktop telephone, What you do, What you hear

1. Turning headset on and off

	What you do		What you hear	What you see
Turning headset	Press and hold	for 3 seconds until	Ascending (low-to-high)	The blue indicator light will
ON	you see a burst of flashes on the blue		tones	flash while the power is on
	indicator light, then release			(see Status indicators page 8)
Turning headset	Press and hold	for 4 seconds until	Descending (high-to-low)	The blue indicator
OFF	you see a burst of flashes on the blue		tones	light will stop flashing
	indicator light, then release

2. Use with desktop telephone

2.1 Tips for connecting cords

For your convenience, you may feed the telephone handset cord through the base’s right or left Cord Slot, depending on the positioning of your telephone.

Use the Cord Management Strips to fasten and organise the cords.

Note: If you connect the Telephone Connection Cord to your telephone’s headset socket instead of the handset socket, this will enable the telephone’s line button. You can now answer and end calls by pressing the line button instead of using the handset. The handset can remain connected to the telephone.

2.2 Pairing headset with base

The headset and the base in their original product box have been factory-paired to ensure instant function- ing of your GN 6210. You do not need to pair these two devices, and you may now proceed to the Clear dial tone adjustment section.

If original pairing is lost (by resetting the base, changing your headset or changing your base), you will have to pair your headset to the base again:

1. Ensure your headset is turned off.

3