•Motorola models
•Newer Siemens models
Note: There are many other models of Bluetooth mobile phone on the market. If you have another model not mentioned above, consult your mobile phone’s user guide or www.gnnetcom.com/gn6210/support to see which profile your mobile phone uses to work with the GN 6210. Trying your GN 6210 with both of your mobile phone’s profiles will also help you determine which profile gives you the optimum functionality.
Preparing your mobile phone for Bluetooth device discovery
When you have determined which of the two profiles you should set up with, put your mobile phone into Bluetooth device discovery mode. You may then begin the pairing instructions described in Section 5 of your Quick Set Up guide. During the pairing process, your GN 6210 will signal the mobile phone and complete pairing when it is in this mode.
Consult your mobile phone’s user guide for full details on selecting the Bluetooth device discovery mode and utilising a headset with your mobile phone. You may also visit www.gnnetcom.com/gn6210/support/ for more information.
Tip: Test that your mobile phone works optimally after completing pairing.
Special call answer instructions: for Sony Ericsson & Siemens mobile phones.
With all Sony Ericsson mobile phones and the Siemens S55 mobile phone, these alternative call answer instructions may be followed: When the mobile is ringing, wait for an audible tone in the headset and press shortly the 
on the headset to answer. You are now connected to your caller.
With all Sony Ericsson mobile phones, outgoing calls will automatically be placed in your headset. This is not the case with Siemens S55.
Note: Some mobile phones require a change in advanced settings in order to perform optimally. Consult your mobile phone’s user guide.
3.2 Making voice-activated calls:
Note: Your mobile phone must have
To make a
1. Place the headset on the ear.
2. Press 
on the headset for 1 second until you hear a double beep. The mobile phone will go into voice command mode, and an audible tone will be heard indicating that the headset is expecting a voice command.
3. Give the desired voice command (according to mobile phone’s instructions). Your call will be established, and the headset indicator will flash frequently for the duration of the call.
3.3 Headset
To switch from using the mobile phone to the headset during a call:
1.Press the 
on the headset until a double beep is heard.
2.Continue the call on your headset.
6
