Sony FVP-1/1E Up Setting, print cartridge, Notes on storing the, If ink ribbon should tear, To replace the print cartridge, To load the half-usedink ribbon cartridge

To replace the print cartridge

If the ribbon indicator flashes and the inserted paper emerges after you insert the paper and the paper is automatically loaded, remove the print paper and replace the print cartridge.

Open the cartridge compartment lid and push up the eject lever. Remove the used print cartridge and replace it with a new one.

Eject lever

Paper supply indicator	Push up the eject lever,
Ribbon error indicator	then remove the used
	print cartridge.

To load the half-used ink ribbon cartridge

Notes on storing the

Wind the ribbon until the black line comes to the left edge.

If ink ribbon should tear

While pressing the center of the reel, wind the ink ribbon in the direction of the arrow.

Up Setting

print cartridge

•Avoid placing the cartridge in a location subject to:

–high temperatures

–high humidity

–excessive dust

–direct sunlight

•When you are going to store a partially-used cartridge for an extended period of time, store it in its original bag.

Repair the ribbon with transparent tape. There should be no problem with using the remaining portion of the ribbon. Before loading the ink ribbon cartridge into the printer, turn the reel until the transparent tape can no longer be seen.

Repair with transparent tape.

Setting Up 15GB