Sony FVP-1/1E input picture, Blur compensation, Re-selectingthe image, Printing an image from the video equipment (continued), (standard)”, 1 Set print mode dial to “

Printing an image from the video equipment (continued)

Blur compensation

When you set INPUT SELECT to “VIDEO MOTION,” the selected image appears on the screen and the horizontal red line moves from the top to the bottom on the left half of screen, then moves from the top to the bottom on the right half of screen. In this sequence, if there is motion blur on the image, the printer automatically compensates for the image (blur compensation).

When the blur compensation ends, the screen darkens once and the print image appears in the screen.

Re-selecting the image

Press PICTURE. The playback picture appears on the screen.

If you press CLEAR ALL, the printer is reset to stand by mode.

Perform printing procedures from the beginning.

22GB Printing

Printing

1 Set print mode dial to “ (standard)”.

2 Start playback on the video equipment.

While the INPUT indicator lights up, the playback picture appears on the screen (input picture).

For details on playing back on the video equipment, refer to the instruction manual of your equipment.

Input image

3 Press CAPTURE when the picture you want to print appears on the screen.

The selected full-size image appears in the center of the screen, and the MEMORY indicator lights up.

Print image