Sony FVP-1/1E If an error message appears, NO DISK, DISK FULL, DISK ERROR, Cannot print, DISK PROTECT, The beeps sound, Troubleshooting (continued)

Troubleshooting (continued)Cannot print.

mInsert the print paper (page 16).

mTry printing again after removing the print paper if the print paper has emerged from the paper outlet at the rear.

mSee ”If the indicators are on” on the next page.

mInsert the print paper if you use the optional automatic feeder (page 17).

mInsert the print cartridge (page 14).

mUse the proper set of the print cartridge and print paper (page 13).

The beeps sound.

mCheck that you operate with the correct procedures.

mSee ”If the indicators are on” on the next page.

If an error message appearsNO DISK

mThe floppy disk is not inserted. Insert the floppy disk into the floppy disk slot.

DISK ERROR

mThe inserted floppy disk is not formatted, or there

is something wrong with the disk. Format the floppy disk in the MS-DOS format (512 byte × 18 sector) using the Digital Mavica or your PC.

DISK PROTECT

mThe write protect tab on the inserted floppy disk is set to the write protect position. Set it to the write enable position and then record the image.

DISK FULL

mThere is not enough space to record the image. Delete unnecessary images, or use a new floppy disk.

42GB For Your Information