Customizing Your Monitor
Using the ZOOM On-screen Display
The ZOOM settings allow you to enlarge or reduce the picture.
Once the setting is adjusted, it will be stored in memory for the current input signal.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
ZOOM,” and press the MENU button again.
The ZOOM OSD appears.
ZOOM
H 
26
V 
73
3Press the >?//buttons to adjust the picture zoom.
/. . . to enlarge the picture ?. . . to reduce the picture
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
Note
The picture zoom adjustment will stop as soon as either the horizontal or vertical size reaches its maximum or minimum value.
Using the COLOR On-screen Display
You can change the monitor’s color temperature. For example, you can change the colors of a picture on the screen to match the actual colors of the printed picture. Once the setting is adjusted, it will be stored in memory for all input signals received.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
COLOR,” and press the MENU button again.
The COLOR OSD appears.
COLOR |
|
|
5000K | 6500K | 9300K |
R |
| 50 |
G |
| 50 |
B |
| 50 |
3Press the >?//buttons to select the color temperature.
There are three color temperature modes in the OSD. The preset adjustments are:
5000K, 6500K, 9300K
12
