Sony GDM-200PST manual Setting the power saving delay time, Locking the controls, Control

Customizing Your Monitor

Setting the power saving delay time

You can set the delay time before the monitor enters the power saving mode. See page 19 for more information on this monitor’s power saving capabilities.

1Press the MENU button.

The MENU OSD appears.

MENU

Locking the controls

The control lock function disables all of the buttons on the front panel except the u (power) switch and MENU button.

1Press the MENU button.

The MENU OSD appears.

MENU

2 Press the ¬./>and >?//buttons to select “	2 Press the ¬./>and >?//buttons to select “
	OPTION,” and press the MENU button again.
OPTION,” and press the MENU button again.	The OPTION OSD appears.

	The OPTION OSD appears.					OPTION
		OPTION					ON
			ON
						ZZ...	1 MIN
							UNLOCK
		ZZ...	1 MIN
			UNLOCK			MANUAL DEGAUSS
		MANUAL DEGAUSS
				3	Press the ¬./>buttons to select “		(CONTROL
3	Press the ¬./>buttons to select “	ZZ...	(PWR SAVE		LOCK).”
	DELAY).”					OPTION
		OPTION					AUTO
			AUTO			ZZ...
							UNLOCK	LOCK
			5 SEC	1 MIN
		ZZ...	60 MIN	OFF
							CONTROL LOCK

PWR SAVE DELAY

4 Press the >?//buttons to select “LOCK.”

4 Press the >?//buttons to select the desired time.

	The OPTION OSD automatically disappears after about 30
	seconds.
	To close the OSD, press the MENU button again.
When PWR SAVE DELAY is set to “OFF,” the monitor
does not go into power saving mode.	Once you select “LOCK,” you cannot select any items
The OPTION OSD automatically disappears after about 30	except “EXIT” and ”	OPTION” in the MENU OSD.
	If you press any button other than the u (power) switch and
seconds.	MENU button, the	mark appears on the screen.
To close the OSD, press the MENU button again.

To cancel the control lock

To reset, press the RESET button while the OSD is on.

Repeat steps 1 through 3 above and press the >?// buttons to select “UNLOCK.”

16