Denon CDR-W1500 operating instructions Relay Mode, Relay mode, Timer playback, Connections

ENGLISH

8. Timer playback

•A separately sold audio timer can be used to start playback or recording at a specific time.

•Also refer to the operating instructions for the audio timer and amplifier.

•The program and relay modes can also be used.

(1) Connections

CDR-W1500 (this set)

-

Amplifier

AC 120 V/60 Hz power outlet

Audio timer

14RELAY MODE

Relay mode

★Various types of playback and recording can be performed through relay operation between the set’s CD and CD-R units.

★There are three relay modes.

★The set mode is stored in the memory, but the data may be cleared if the power is not turned on for 2 or 3 days.

•The mode switches as shown below each time the RELAY MODE button is pressed.

ª	•	The disc in the CD unit and the one in the CD-R	“Relay Play”
Relay mode:
		unit are played one after the other.

ª• Programmed play and random play of the disc in

Mix mode:	the CD unit and the one in the CD-R unit can be	“Mix Play”
ª	performed as if the two discs were a single disc.
	• The CD and CD-R units can be operated
Dual mode:		“Dual Play”
	independently.
ª
Normal mode:	• Either the CD or the CD-R unit can be operated.	“Single Play”

(2) Timer playback

Select the deck to be operated.

(Main unit)

PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500

DUBBING

DISPLAY

TITLE /

8

9

NORMAL

HIGH

TIME

SELECT

CHARACTER

TIME

CLEAR

INPUT

FINALIZE

4REC

8

9

REMOTE SENSOR

POWER

PHONES

PHONES LEVEL

MULTI JOG

PLAY

STOP

PAUSE

RELAY MODE

OPEN / CLOSE

ON

OFF

-

OPEN /CLOSE

MENU

PLAY

STOP

PAUSE

+

1

2

3

5

5

1

2

3

MIN

MAX

PUSH

ENTER

5 5

(Remote control unit)

CD CD-R

_ DUBBING _		RELAY
NORMAL HIGH		MODE
A ! "	D # %		G & '
1		2	3
J （ ）�	M ＊�＋�P , －�
4		5	6
S . ／�	V : ;		Y ＜ ＞�
7		8	9
[ = ]	{	? }	CLEAR
10	+10

REC

67

MENU

8	ENTER		9
STOP	PLAY		PAUSE
2			3	1
PROG/DIRECT	CALL	1 / ALL	A - B
RANDOM	TIME	TITLE CHARACTER

NOTE:

•Recording, finalizing and editing are not possible in the relay or mix mode.

1	Turn on the power of the CDR-W1500 and the connected components.
2	Perform the procedure at “Setup Method (10) Timer play mode setting” (Page 13) and make the timer playback on
	setting.
3	Load the Disc for timer playback into the CDR-W1500.
4	Set the amplifier's input selector to “CD”.
5	Press the play button (1 PLAY).
	• Play the disc to check the volume.

Set the audio timer for the desired time.

6• The power of the components connected to the audio timer turns off.

•When the set time is reached, the power of the various components turns on automatically and playback begins from track one.

•The settings for the program mode, random mode, relay mode, etc., are stored in the memory before the power is turned off.

•If there is no disc in the CD side and a disc is loaded in the CD-R side:

Timer playback does not function when the relay mode is set to normal or dual.

Timer playback functions for the CD-R side when the relay mode is set to relay or mix.

24