ENGLISH

18MESSAGES

Messages may appear on the display while using the CDR-W1500. The meanings of these messages are explained below.

Message

Meaning

 

 

TOC Reading

Reading disc information.

 

 

Open

During tray opening.

 

 

Close

During tray closing.

 

 

No Disc

No disc inserted, disc unreadable or disc inserted upside down.

 

 

Use Audio CD

Inserted disc is no audio CD.

 

 

Now PMA Rec

Updating disc contents.

 

 

Disc Full

No more recording possible.

 

 

 

No digital recording can be made of the connected source.

Copy Prohibit

See “Digital Copies” on Page 6.

Data signals other than audio signals have been input.

 

 

These signals are not recorded.

 

 

Finalize *.**

Time countdown when finalizing a disc.

 

 

PlaybackOnly

When trying to record on a finalized CD-R or a prerecorded CD.

 

 

Now OPC

During laser power calibration for unfinalized discs.

 

 

OPC Error

OPC failure during OPC procedure

(OPC = Optimum Power Calibration)

 

 

 

Rec Error

An error has occurred during recording.

 

 

Disc Error

Recording or finalization is not possible due to a disc fault.

 

 

Blank Disc

When attempting to edit text for a disc which has no tracks.

 

 

No Name

No text stored for disc.

 

 

Sync. -**dB

Setting value of the synchro recording starting level.

 

 

 

There is an incomplete connection of the digital input jack during

Dig.Unlock

digital input recording, or the input signal is not being input properly

 

due to some other factor.

 

 

Message

Meaning

 

 

Name Full

23 text characters have already been input or a total of 900 characters

have already been input.

 

 

 

Mecha Error

Disc is not operating properly.

 

 

All Skip Tr

Skip is set for all tracks.

 

 

Complete

Mode reception has been completed.

 

 

TextEraseOK?

If the disc is removed, all the text information is cleared.

 

 

CD-R Short

The recordable time on the disc is shorter than the time of the

recording source you are trying to copy.

 

 

 

Text Protect

The text information is copy-protected so the text cannot be copied in

the copy mode.

 

 

 

Now Tr Check

The CD side track information is being checked.

 

 

(“*” indicates a letter or character.)

34

Page 34
Image 34
Denon CDR-W1500 operating instructions Messages, Message Meaning