Denon CDR-W1500 Manual recording Starting analog recording, Starting digital recording

ENGLISH

1. Manual recording

(1) Starting analog recording

(Main unit) (Remote control unit)

Select the CD-R side.

CD

CD-R

4 2 8

_ DUBBING _

RELAY

NORMAL

HIGH

MODE

A ! "

D # %

G & '

1

2

3

J （ ）�

M ＊�＋�P , －�

4

5

6

S . ／�

V : ;

Y ＜ ＞�

PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500

7

8

9

[ = ]

{

? }

CLEAR

10

+10

DUBBING

DISPLAY

TITLE /

8

8

9

NORMAL

HIGH

TIME

SELECT

CHARACTER

TIME

CLEAR

INPUT

FINALIZE

4REC

8

9

REMOTE SENSOR

REC

POWER

PHONES

PHONES LEVEL

MULTI JOG

PLAY

STOP

PAUSE

RELAY MODE

OPEN / CLOSE

ON

OFF

-

+

OPEN /CLOSE

MENU

PLAY

STOP

PAUSE

6

MENU

7

1

2

3

5

5

1

2

3

MIN

MAX

PUSH

ENTER

8

ENTER

9

STOP

PLAY

PAUSE

2

3

	1	9	2	5	10	10	PROG/DIRECT CALL	1 / ALL	A - B
								TITLE CHARACTER
							RANDOM TIME
						4
							DISPLAY SEL . FADER INPUT		FINALIZE
						5	B
							REMOTE CONTROL UNIT RC-278
1	Turn on the power.
2	Load the CD-R/RW disc that is to be recorded.
3	Perform the operation of “Setup Method (2) Setting the Synchro Recording Mode ” on Page 11 and select the Synchro
	off mode.
4	When using an already recorded Disc, press the TIME button to check the recordable time.
	• The time display switches between the total recorded time and the recordable time each time the TIME button is
	pressed.
5	Press the input switching button (INPUT) and select the analog source.
	• The “ANALOG” display will light.

Perform the operation of “Setup Method” on Page 11 and select on/off of the ATM function.

•ATM Function on

6	The “ATM” display will light. When a blank portion (of about 3 seconds or longer) of the recording input signal is
	detected, the track number is automatically associated and recorded.

•ATM Function off

This is recorded as the following track.

7	Start playing the selection you want to record on the CD player, cassette deck, etc.
8	Press the record button (4 REC).
	• The recording standby mode is set.
	Adjust the recording level with the jog dial and press the enter button.
	• Adjust the input level adjustment control (INPUT LEVEL) so that the “OVER” indicator does not light even when the
9	volume is loudest. After adjusting, set the source to be recorded to the standby mode.
	✽ The recording level can be set in advance using the menu mode.

•The set recording level will be stored in memory, but this data might be lost if the unit is not connected to a power source for 2 to 3 days.

10	Press the play button (1 PLAY).
	• Recording starts.
11	Start playing the selection you want to record on the CD player, cassette deck, etc.

16

(2) Starting digital recording

•This set includes a sampling rate converter.

When recording DATs or satellite broadcasts (32 kHz or 48 kHz) whose digital input signal sampling frequency is different from that of CD (44.1 kHz), the sampling frequency is automatically converted to 44.1 kHz.

(Main unit)	(Remote control unit)
		CD CD-R
Select the CD-R side.	_ DUBBING _	RELAY
	NORMAL HIGH	MODE

4

2

8

A

!

"

D # %

G & '

1

2

3

J （ ）�

M ＊�＋�P , －�

4

5

6

S . ／�

V : ;

Y ＜ ＞�

7

8

9

[

=

]

{ ? }

CLEAR

PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500

10

+10

8

REC

DUBBING

DISPLAY

TITLE /

6

MENU

7

8

9

NORMAL

HIGH

TIME

SELECT

CHARACTER

TIME

CLEAR

INPUT

FINALIZE

4REC

8

9

REMOTE SENSOR

POWER

PHONES

PHONES LEVEL

MULTI JOG

	PLAY	STOP	PAUSE RELAY MODE	OPEN / CLOSE	ON OFF	+	OPEN /CLOSE	MENU	PLAY	STOP	PAUSE
					-							8	ENTER		9
	1	2	3	5			5		1	2	3
					MIN MAX	PUSH						STOP	PLAY		PAUSE
						ENTER
												2			3
											10	PROG/DIRECT CALL		1 / ALL	A - B
												RANDOM	TIME	TITLE CHARACTER
					1	9	2	5	10		4	DISPLAY SEL . FADER INPUT			FINALIZE
											5		B
												REMOTE CONTROL UNIT RC-278
1	Turn on the power.
2	Load the CD-R/RW disc that is to be recorded.
3	Perform the operation of “Setup Method (2) Setting the Synchro Recording Mode” on Page 11 and select the Synchro off mode.
4	When using an already recorded Disc, press the TIME button to check the recordable time.
	• The time display switches between the total recorded time and the recordable time each time the TIME button is pressed.
5	Press the input switching button (INPUT) and select the digital source (Optical or Coaxial).
	• The indicator for the selected input source (“CD”, “OPT” or “COAX”) lights.
	Perform the operation of “Setup Method” on Page 11 and select on/off of the ATM function.
	• ATM Function on
6	The “ATM” display will light. When a blank portion (of about 3 seconds or longer) of the recording input signal is detected, the
	track number is automatically associated and recorded.

•ATM Function off

This is recorded as the following track.

7	Start playing the selection you want to record on the CD player, MD recorder, etc.
8	Press the record button (4 REC).
	• If the “D. in” indicator is flashing, check the connections to the digital input jacks.
	Adjust the recording level with the jog dial and press the enter button.
	• Adjust the input level adjustment control (INPUT LEVEL) so that the “OVER” indicator does not light even when the volume is
9	loudest. After adjusting, set the source to be recorded to the standby mode.
	✽ The recording level can be set in advance using the menu mode.

•The set recording level will be stored in memory, but this data might be lost if the unit is not connected to a power source for 2 to 3 days.

10	Press the play button (1 PLAY).
	• Recording starts.
11	Play the selection to be recorded on the CD player, etc.

NOTES:

•“CD” can be selected by pressing the input selector button, but manual recording from the set’s CD unit is only possible in the dual mode. (Refer to “Dual mode” on Page 26, 27).

•When you do not wish to change the digital recording level, set the jog dial so that “Level 00.0dB” is displayed. The recording will be made without changing the input signal level.

•The recording level can be adjusted over a range of – ∞ to +12 dB for analog input recording and from – ∞ to 0 dB for digital input recording. Note that the displayed setting values may include a degree of error in terms of calculation processing.

•When the recording level is – ∞ , “Level---.-dB” is displayed and audio is not output.