Sony GDM-F400T9, GDM-F500T9 Adjusting the shape of the picture (GEOM), Enlarging or reducing the picture (ZOOM), Adjusting the color of the picture (COLOR), Select, Press the joystick

Adjusting the shape of the picture (GEOM)

The GEOM settings allow you to adjust the rotation and shape of the picture.

The rotation setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight GEOM and press the joystick again.

The GEOMETRY menu appears on the screen.

3First move the joystick up or down to select the desired adjustment item. Then move the joystick left or right to make the adjustment.

	Select	To
	ROTATION	rotate the picture

	PINCUSHION	expand or contract the picture sides

	PIN BALANCE	shift the picture sides to the left or right

	KEYSTONE	adjust the picture width at the top of
		the screen

	KEY BALANCE	shift the picture to the left or right at
	KEY BALANCE	the top of the screen
		the top of the screen

Enlarging or reducing the picture (ZOOM)

This setting is stored in memory for the current input signal.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight ZOOM and press the joystick again.

The ZOOM menu appears on the screen.

3Move the joystick left or right to enlarge or reduce the picture.

Note

Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.

Adjusting the color of the picture (COLOR)

The COLOR settings allow you to adjust the picture’s color temperature by changing the color level of the white color field. Colors appear reddish if the temperature is low, and bluish if the temperature is high. This adjustment is useful for matching the monitor’s colors to a printed picture’s colors.

This setting is stored in memory for all input signals.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight COLOR and press the joystick again.

The COLOR menu appears on the screen.

3Move the joystick left or right to select a color temperature.

The preset color temperatures are 5000K, 6500K, and 9300K. Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 6500K and 5000K.

4If necessary, fine tune the color temperature.

First move the joystick up or down to select the desired adjustment item. Then move the joystick left or right to make the adjustment.

COLOR

1 6500K 9300K

RBIAS 76

G BIAS 50

B BIAS 50

R GAIN 50

G GAIN 50

B GAIN 50

1 Adjusting the BIAS (black level)

This changes the brightness of both the dark and light areas of an image.

2Adjusting the GAIN (white level)

This changes the contrast of just the light areas of an image.

You can adjust the R(Red), G(Green), and B(Blue) component of the input signal when making changes to items

1and 2.

If you fine tune the color temperature, the new color settings are stored in memory for each of the three color temperatures and item 3of the on-screen menu changes as follows:

•[5000K] t [1]

•[6500K] t [2]

•[9300K] t [3]