Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard.

1 (power) indicator

If the 1 (power) indicator is green

1Remove any plugs from the video input 1 and 2 connectors, or turn off the connected computer(s).

2Press the 1 (power) button to turn the monitor off and on.

3Move the joystick to the right for 2 seconds before the monitor enters power saving mode.

If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor’s condition.

If the 1 (power) indicator is flashing orangePress the 1 (power) button to turn the monitor off and on.

If the 1(power) indicator lights up green, the monitor is working properly.

If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor’s condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and video board.

Specifications

GDM-F400T9

CRT

0.22 mm aperture grille pitch

 

19 inches measured diagonally

 

90-degree deflection

 

FD Trinitron

Viewable image size

Approx. 364.8 × 273.6 mm (w/h)

 

(14 3/8 × 10 7/8 inches)

 

18.0" viewing image

Resolution

Horizontal: Max. 1600 dots

 

Vertical: Max. 1200 lines

Standard image area

Approx. 352 × 264 mm (w/h)

 

(13 7/8 × 10 1/2 inches)

 

or

 

Approx. 330 × 264 mm (w/h)

 

(13 × 10 1/2 inches)

Deflection frequency*

Horizontal: 30 to 107 kHz

 

Vertical: 48 to 160 Hz

AC input voltage/current

100 to 240 V, 50 – 60 Hz, 1.8 – 1.0 A

Power consumption

Max. 140 W (with no USB devices

 

connected)

Dimensions

Approx. 444 × 476 × 455 mm (w/h/d)

 

(17 1/2 × 18 3/4 × 18 inches)

Mass

Approx. 28 kg (61 lb 12 oz)

Plug and Play

DDC1/DDC2B/DDC2Bi/DDC2B+

Supplied accessories

See page 6

GDM-F500T9

CRT

0.22 mm aperture grille pitch

 

21 inches measured diagonally

 

90-degree deflection

 

FD Trinitron

Viewable image size

Approx. 403.8 × 302.2 mm (w/h)

 

(16 × 12 inches)

 

19.8" viewing image

Resolution

Horizontal: Max. 1800 dots

 

Vertical: Max. 1440 lines

Standard image area

Approx. 388 × 291 mm (w/h)

 

(15 3/8 × 11 1/2 inches)

 

or

 

Approx. 364 × 291 mm (w/h)

 

(14 3/8 × 11 1/2 inches)

Deflection frequency*

Horizontal: 30 to 121 kHz

 

Vertical: 48 to 160 Hz

AC input voltage/current

100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A

Power consumption

Max. 160 W (with no USB devices

 

connected)

Dimensions

Approx. 502 × 511 × 486.3 mm (w/h/d)

 

(19 7/8 × 20 1/8 × 19 1/4 inches)

Mass

Approx. 34 kg (74 lb 15 oz)

Plug and Play

DDC1/DDC2B/DDC2AB/DDC2B+

Supplied accessories

See page 6

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

18