Troubleshooting
Symptom | Cause and/or Corrective Actions |
No function works even though the | • Disconnect the mains lead of the AC power adaptor or remove |
power is on. | the battery, then reconnect it after about one minute. Turn the |
| power on. If the functions still do not work, press the RESET |
| button on the backside of your (recording) VCR using a sharp- |
| pointed object. (If you press the RESET button, all the settings |
| including the date and time return to the default.) |
The battery pack is quickly | • The operating temperature is too low. |
discharged. | • The battery pack is not fully charged. |
| c Charge the battery pack fully again (p. 10). |
| • The battery pack is completely dead, and cannot be recharged. |
| c Replace with a new battery pack (p. 9). |
You cannot charge the battery pack. | • The POWER switch is not set to OFF. |
| c Set it to OFF. |
While charging the battery pack, the • Something is wrong with the battery pack. | |
POWER ON/CHARGE lamp flashes. | c Contact your Sony dealer or a local authorized Sony service |
| facility. |
The melody or beep sounds for 5 | • Moisture condensation has occurred. |
seconds. | c Remove the cassette and leave your (recording) VCR for at |
| least 1 hour to acclimatize (p. 95). |
| • Some trouble has occurred in your (recording) VCR. |
| c Remove the cassette and insert it again, then operate your |
| (recording) VCR. |
While editing using the i.LINK | • Remove the i.LINK cable (DV connecting cable), and connect it |
cable (DV connecting cable), the | again. |
recording picture cannot be |
|
monitored. |
|
Дополнитeльнaя Information Additional
Digital program editing does not function.
•The input selector on the other (playback) VCR is not set correctly.
c Check the connection and set the input selector on the other (playback) VCR again (p. 46, 48).
•Your (recording) VCR is connected to on Sony DV equipment, using the i.LINK cable (DV connecting cable).
c Keep the connection and follow the procedure on page 51 to 55.
•Setting a programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 59).
•Your (recording) VCR and the other (playback) VCR are not synchronized.
c Adjust the synchronicity (p. 57).
инфоpмaция
The Remote Commander supplied with a Sony digital video camera recorder does not work.
•The remote control code is not set correctly or set to OFF.
cSet COMMANDER in the menu settings (p. 17, 67).
•Something is blocking the infrared rays.
cRemove the obstacle.
•The batteries are inserted in the battery holder with the + – polarities incorrectly matching the + – marks.
cInsert the batteries with the correct polarity.
•The batteries are dead.
cInsert new ones.
85