Specifications (Continued)

**The unique pixel array of Sony’s ClearVid CMOS sensor and image processing system (Enhanced Imaging Processor) allows for still image resolution equivalent to the sizes described.

Output connectors

A/V Remote Connector

10-pin connector

When A/V connecting cable is connected

Video signal: 1 Vp-p, 75 Ω (ohms)

Luminance signal: 1 Vp-p, 75 Ω (ohms)

Chrominance signal: 0.286 Vp-p (burst signal), 75 Ω (ohms)

When component A/V cable is connected

Y:1 Vp-p, 75Ω (ohms), PB/PR, CB/CR: +/- 350 mV, 75 Ω (ohms)

Audio signal: 327 mV (at load impedance 47 kΩ (kilohms)), Output impedance with less than 2.2 kΩ

(kilohms)

HDMI OUT jack

TypeA (19-pin)

i(headphones) jack

Stereo-minijack (Ø 3.5 mm)

Input/Output connectors

LANC jack

Stereo mini-minijack (Ø 2.5 mm)

HDV/DV jack

i.LINK interface (IEEE 1394, 4-pin connector S100)

MIC jack

Stereo-minijack (Ø 3.5 mm)

LCD screen

Picture

8.0cm (3.2 type, aspect ratio 16:9)

Total dot number

921 600 (1 920 × 480)

General

Power requirements

DC 7.2 V (battery pack)

DC 8.4 V (AC Adaptor)

Average power consumption

During camera recording using the viewfinder with normal brightness: HDV recording 6.4 W

DV recording 6.1 W

During camera recording using the LCD with normal brightness: HDV recording 6.6 W

DV recording 6.3 W

Operating temperature

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature

-20 °C to +60 °C (-4 °F to +140 °F)

Dimensions (approx.)

169 × 178 × 349 mm

(6 3/4 7 13 7/8 in.) (w/h/d) including the projecting parts except for the grip belt

169 × 178 × 349 mm

(6 3/4 7 13 7/8 in.) (w/h/d) including the projecting parts with the battery pack (NP-F570)

Mass (approx.)

2.1kg (4 lb 9 oz) including the lens hood with lens cover

2.3kg (4 lb 15 oz) including the lens hood with lens cover, battery pack (NP- F570), cassette (DVM60) and large eyecup

120