Remote Commander

Remove the insulation sheet before using the Remote Commander.

Insulation sheet

7

18 2

39 4

5

60

APHOTO (30)

The on-screen image when you press this button will be recorded onto the “Memory Stick Duo” as a still image.

BMemory control buttons (Index, –/+, Memory/playback) (50)

CSEARCH M. (55)

D. >

EVideo control buttons (Rewind, Playback, Fast-forward, Pause, Stop, Slow) (49)

FZERO SET MEMORY (54)

GTransmitter

HSTART/STOP (28, 54)

IPower zoom (31)

JDISPLAY (52)

bNotes

•Aim the Remote Commander towards the remote sensor to operate your camcorder.

•Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Remote Commander may not function properly.

•When you are operating with the Remote Commander supplied with your camcorder, your VCR may also operate. In that case, select a commander mode other than VTR 2 for your VCR, or cover the sensor of your VCR with black paper.

To change the battery of the Remote Commander

1While pressing on the tab, inset your fingernail into the slit to pull out the battery case.

2Place a new battery with the + side facing up.

3Insert the battery case back into the Remote Commander until it clicks.

Tab

WARNING

Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

•When the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

Reference Quick

127