Sony 4-111-862-11(1), HDR-FX1000 Using the Shot transition, Assigning the functions to the ASSIGN buttons (Continued)

Assigning the functions to the ASSIGN buttons (Continued)

2 Press the ASSIGN button to which [END SEARCH] is assigned.

The last scene of the most recent recording will be played back for about 5 seconds, and the camcorder goes the standby at the point where the last recording has finished.

bNotes

•End search will not work once you eject the tape.

•End search will not work correctly if a blank section exists between recorded sections on the tape.

Using the Shot transition

You can store settings of focus, zoom, iris, gain, shutter speed and white balance, and smoothly shift from the current settings to the stored settings (shot transition).

For example, you can shift the focus from closer objects to farther objects, or change the depth of field by adjusting the iris. You can also develop scenes under different conditions smoothly. If you store manually adjusted settings of white balance, you can smoothly shift from one scene to another under different conditions, such as from indoor to outdoor.

Sony recommends that you use a tripod to avoid image blurring.

SHOT-A

SHOT-B

You can set the transition curve and duration using [SHOT TRANSITION] (p. 71).

ASSIGN 4-6 buttons

1 Assign [SHOT TRANSITION] to the ASSIGN buttons (p. 44).

zTips

•Shot transition is assigned to ASSIGN 4, 5 and 6 buttons.