Searching for a scene by date of recording (Date search)
You can search scenes by recording dates.
1 Set the POWER switch to VCR.
2 Press the SEARCH M. button A on the Remote Commander repeatedly to select [DATE SEARCH].
3 Press the . (previous)/> (next) button B on the Remote
Commander to select a recording date.
You can select a date previous or next to the date of the current tape position.
Playback automatically starts from the scene recorded on the selected date.
You can search scenes by indexes recorded at the start of recording (p. 45).
1 Set the POWER switch to VCR.
2 Press the SEARCH M. button A on the Remote Commander repeatedly to select [INDEX SEARCH].
3 Press the . (previous)/> (next) button B on the Remote
Commander to select an index point.
You can select an index previous or next to the index of the current tape position.
Playback automatically starts from the scene marked by the index.
Recording/Playback
To cancel the operation
Press the STOP button F on the Remote Commander.
bNotes
•Each day of recording must be longer than 2 minutes. Your camcorder may not detect the date if the recording of that date is short.
•The date search may not work properly if a blank section exists on the tape.
Press the STOP button F on the Remote Commander.
bNotes
•Recording between indexes must be longer than 2 minutes. Your camcorder may not detect the date if the recording between the indexes is short.
•The index search may not work properly if a blank section exists on the tape.
55