The playback screen goes blank. (Solid blue screen)

•The video heads will degrade after long use. If you cannot obtain a clear image even after using a cleaning cassette (optional), it might be because the video heads are worn out. Please contact your Sony dealer or local authorized Sony service facility to have the video heads replaced.

LCD screen

•Do not exert excessive pressure on the LCD screen, as it may cause damage.

•If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction.

•While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction.

xTo clean the LCD screen

If fingerprints or dust make the LCD screen dirty, it is recommended you use a soft cloth to clean it. When you use the LCD Cleaning Kit (optional), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid.

xOn adjustment of the touch panel(CALIBRATION)

The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. It is recommended you connect your camcorder to the wall outlet using the supplied AC Adaptor during the operation.

1Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp.

2Touch t [MENU] t (STANDARD SET) t [CALIBRATION] t .

CALIBRATION

1/3

Touch the "x"

CANCEL

3Touch the “×” displayed on the screen with the corner of the “Memory Stick Duo” or the like.

The position of the “×” changes.

To cancel, touch [CANCEL].

If you did not press the right spot, start from step 3 again.

bNotes

•You cannot calibrate the LCD screen if it is rotated.

On handling the casing

• If the casing is soiled, clean the camcorder body

 

with a soft cloth lightly moistened with water,

 

and then wipe the casing with a dry soft cloth.

 

• Avoid the following to avoid damage to the

 

finish.

 

– Using chemicals such as thinner, benzine,

 

Additional

hands.

alcohol, chemical cloths, repellent, insecticide

 

and sunscreen.

 

– Handling with above substances on your

 

 

Information

– Leaving the casing in contact with rubber or vinyl objects for a long period of time.

About care and storage of the lens

• Wipe the surface of the lens clean with a soft cloth in the following instances:

– When there are fingerprints on the lens surface.

– In hot or humid locations

– When the lens is exposed to salty air such as at the seaside.

• Store in a well-ventilated location subject to little dirt or dust.

• To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time.

Continued , 99