TELE MACRO

This is useful to shoot small subjects, such as flowers or insects. You can blur out backgrounds and the subject stands out clearer.

When you set [TELE MACRO] to [ON]

(), the zoom (p. 22) moves to the top of the T (Telephoto) side automatically and allows for recording subjects at a close distance as follows:

For HDR-HC5E: down to about 37 cm (14 5/8 in.).

For HDR-HC7E: down to about 45 cm (17 3/4 in.).

To cancel, touch [OFF], or zoom to wide- angle (W side).

bNotes

When recording a distant subject, focusing may be difficult and can take some time.

Adjust the focus manually ([FOCUS], p. 42) when it is hard to focus automatically.

FLASH SET

You can set this function when you use the built-in flash or an external flash (optional) that is compatible with your camcorder.

xFLASH LEVELHIGH( )

Makes the flash level higher.

BNORMAL()LOW()

Makes the flash level lower. x REDEYE REDUC

You can prevent redeye by activating the flash before recording.

Set [REDEYE REDUC] to [ON], then press the (flash) button (p. 23) repeatedly to select a setting.

(Auto redeye reduction): Pre-flashes to reduce redeye before the flash automatically flashes when there is insufficient ambient light.

r

(Forced redeye reduction): Always uses the flash and the redeye reducing pre-flash.

r

(No flash): Records without flash.

bNotes

The redeye reduction may not produce the desired effect due to individual differences and other conditions.

SUPER NS (Super NightShot)

The picture will be recorded at a maximum of 16 times the sensitivity of NightShot recording if you set [SUPER NS] to [ON] while the NIGHTSHOT switch (p. 24) is also set to ON.

and [“SUPER NIGHTSHOT”] appear on the screen.

To return to the normal setting, set [SUPER NS] to [OFF], or set the NIGHTSHOT switch to OFF.

bNotes

Do not use NightShot/[SUPER NS] in bright places. This may cause a malfunction.

Do not cover the infrared port with your fingers or other objects (p. 103).

Remove the conversion lens (optional).

Adjust the focus manually ([FOCUS], p. 42) when it is hard to focus automatically.

The shutter speed of your camcorder changes depending on the brightness. The motion of the picture may slow down in this case.

Menu the Using

Continued , 43