GENERAL SET

(Other setup items)

Touch 1, then 2.

If the item is not on the screen, touch v/V to change the page.

How to set

(HOME MENU) t page 57 (OPTION MENU) t page 70

The default settings are marked with B.

DEMO MODE

The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you slide the POWER switch to (Movie).

zTips

The demonstration will be suspended in situations such as those described below.

When you press START/STOP or PHOTO.

When you touch the screen during the demonstration (The demonstration starts again after about 10 minutes).

When you remove or insert a “Memory Stick PRO Duo.”When you set the POWER switch to (Still).When you press (HOME), (VIEW IMAGES), or (Film Roll Index).REC LAMP (Recording lamp)

The camera recording lamp on the front of your camcorder lights up, as the default setting is [ON].

CALIBRATION

See page 94.

A.SHUT OFF (Auto shut off)B5 min

The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes.

NEVERThe camcorder is not automatically turned off.

bNotes

When you connect your camcorder to a wall outlet, [A.SHUT OFF] is automatically set to [NEVER].

REMOTE CTRL (Remote control)The default setting is [ON], allowing you to use the supplied Remote Commander(p. 102).

zTips

Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.

Camcorder Your Customizing

69