Listening to the sub woofer
POWER indicator
POWER
First, turn down the volume on the receiver. The volume should be set to minimum before you begin playing the program source.
1 Turn on the receiver and select the program source.
2 Press POWER on the sub woofer.
The POWER indicator on the sub woofer lights up in green.
3 Play the program source.
Adjusting the sound
Slight adjustments to the system can enhance your sound enjoyment.
Adjusting the sub woofer
LEVEL
1 Rotate LEVEL to adjust the volume.
Set the volume level to best suit your preference according to the program source.
Note
Do not turn the volume of the woofer to maximum. Extraneous noise may be heard.
After connecting all of your components to the receiver, do the following to verify that the connections were made correctly.
1 Press ?/1 to turn on the receiver.
2 Turn on the component that you connected (e.g., CD player or tape deck).
3 Press the input selector button (e.g., CD or MD/TAPE) to select the component (program source).
4 Start playing.
If you do not obtain normal sound output after performing this procedure, see “Troubleshooting” on page 41 and take the appropriate measures to correct the problem.
Up Hooking
Setting and the Up System Speaker