Basic Operations
Selecting the component
Input Selector buttons
Press the input selector button to select the component you want to use.
To select | Press |
VCR | VIDEO 1 or VIDEO 2 |
|
|
Satellite tuner | VIDEO 2 |
|
|
DVD player | DVD |
|
|
MD or Tape deck | MD/TAPE |
|
|
CD player | CD |
|
|
Built in tuner | TUNER FM/AM |
|
|
After turning on the component you selected, select the component and play the program source.
•After selecting VCR or DVD player, turn on the TV and set the TV’s video input to match the component you selected.
INPUT MODE
Press INPUT MODE to select the input mode for your digital components.
Each time you press the button, the input mode of the currently selected component switches.
Select | To |
AUTO IN | Give priority to digital |
| signals when there are both |
| digital and analog |
| connections. If there are no |
| digital signals, analog is |
| selected. |
|
|
COAX IN | Specify the digital audio |
| signals input to the |
| DIGITAL COAXIAL input |
| jacks. |
|
|
Select | To |
OPT IN | Specify the digital audio |
| signals input to the |
| DIGITAL OPTICAL input |
| jacks. |
|
|
ANALOG | Specify the analog audio |
| signals input to the AUDIO |
| IN (L/R) jacks. |
Note
When the 96 kHz digital signal is input, the tone, sound field and surround effects do not function.
MUTING
Press MUTING on the remote to mute the sound. Press again to cancel the muting function. The muting function is also canceled when you turn the power on or turn the MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
•When the headphones are connected, speaker output is automatically canceled and “SP” do not light up in the display.