Specifications (continued)

SA-WMSP75 for sub woofer

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6 ohm loads, from 28 – 200 Hz;

rated 75 watts (SA-WMSP75), minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output.

Speaker system

Active subwoofer,

 

magnetically shielded

Speaker unit

Woofer: 20 cm cone type

Enclosure type

Acoustically loaded bass

 

reflex

Continuous RMS power output (6 ohms, 20 – 250 Hz)

75 W

Reproduction frequency range

28 Hz – 200 Hz

High frequency cut-off frequency 150 Hz

Input

LINE IN (input pin jacks)

Power requirements

120 V AC, 60 Hz

Power consumption

75 W

Dimensions (w/h/d)

Approx.10 3/4 ⋅ 12 7/8 ⋅

 

15 3/4 inches including

 

front panel

Mass

Approx. 19 lb 14 oz

Supplied accessories

FM wire antenna (1) AM loop antenna (1)

Speaker connecting cord, long (2) Speaker connecting cord, short (3)

Monaural connecting cord (1 phono to 1 phono) (1) Coaxial digital cord (1)

Foot pads (speakers) (20) Foot pads (subwoofer) (4) Remote commander (1)

R6 (size -AA) batteries (2) Speakers

•Front speakers (2)

•Center speaker (1)

•Surround speakers (2)

•Sub woofer (1)

For details on the area code of the component you are using, see page 4.

Design and specifications are subject to change without notice.

46US