5Press ENTER.
The station is stored.
v
ST
FM
MHz
6Repeat 1to 5to store other stations.
To tune in a station with a weak signal
Press TUNING +/– repeatedly in 2to tune in the station manually.
To change the preset number
Start over from 1.
To change the AM tuning interval (Except for European and Mexican models)
The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off the system by pressing [/1on the remote or on the system. While holding down xon the system, turn on the power by pressing [/1 on the remote or on the system. When you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.