Precautions
On power sources
AC power cord must be changed only at the qualified service shop.
On placement
•Place the system in a location with adequate ventilation to prevent heat
•At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction. However, touching the cabinet should be avoided. Do not place the unit in a confined space where ventilation is poor as this may cause overheating.
•The system is equipped with a high power amplifier. If the ventilation slots on the bottom are blocked, the unit can overheat and malfunction.
•Do not place the system on a soft surface such as a rug that might block the ventilation holes on the bottom.
•Do not place the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.
On operation
•If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the system. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.
•When you move the system, make sure that you take out all discs. Otherwise, the discs may be damaged.
On adjusting volume
Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
If you have any questions or problems concerning your system, please consult your nearest Sony dealer.
On cleaning discs
Do not use a commercially available CD/DVD cleaning disc. It may cause a malfunction.
On your TV’s color
If the speakers should cause the TV screen to have color irregularity, turn off the TV at once then turn it on after 15 to 30 minutes. If color irregularity should persist, place the speakers further away from the set.
IMPORTANT NOTICE
Caution: This system is capable of holding a still video image or
On moving the system
Before you move the system, remove all discs. Press x and DISC SELECT 4 on the system simultaneously until “MECH LOCK” appears on the front panel display. You can then turn off the system and unplug the AC power cord.
4GB