Using the Volume Limit function

When the System Audio Control function is active, and the output method changes from the TV speaker to the system speaker automatically, loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum volume level.

1 Press AMP MENU.

2 Press x/X repeatedly until “SET HDMI” appears, then press or c.

3 Press x/X repeatedly until “VOL LIMIT” appears, then press or c.4 Press x/X to select the maximum volume level you want.

The maximum volume level changes as follows:

MAX y 49 y 48.....2 y 1 y MIN

5 Press AMP MENU.

The AMP menu turns off.

Notes

•This function is available only when the Control for HDMI function is set to on.

•This function is not available when the output method changes from the system speaker to the TV speaker.

Tips

•We recommend that you set the maximum volume level to a little lower than the volume you usually listen to.

•Regardless of the maximum volume level you set, the VOLUME +/– button of the system and the MASTER VOL +/– button of the remote are operable.

•If you do not want to limit the maximum volume level, select “MAX.”

Using the input buttons of the remote

The input buttons (TV (white), BD, DVD, SAT) work as follows when the Control for HDMI function is set to on.

•BD, DVD, SAT: Since the input of the TV is also switched automatically, you can watch the image of the selected component on the TV simply by pressing the buttons.

•TV: The input of the TV switches automatically. When you connect a Sony TV, you can watch the TV simply by pressing the buttons.

•You can control connected Sony components by pressing the input buttons. For details, refer to “Controlling the connected Sony components with the remote” (page 27).

Features Sync “BRAVIA”

25US