Installing the system

Install an active subwoofer and a satellite speaker as shown in the illustration below. When you install the active subwoofer, allow for a space of at least 30 cm (12 inches) on the active subwoofer’s right side.

At least 30 cm (12 inches)

Satellite speaker

Active subwoofer

Note

•Do not block the heat ventilation on the rear panel of the active subwoofer.

To hang the satellite speaker onto the TV stand

You can hang the satellite speaker onto the following TV stand models (not supplied):

•SU-FL300M

•SU-FL300L

Use the speaker hook (supplied with the TV stand) to hang the satellite speaker onto the TV stand, in the same way as for SS-CT74. For details, refer to the operating instructions supplied with the TV stand.

To install the satellite speaker on the wall

You can install the satellite speaker on the wall.

1 Prepare screws (not supplied) that are suitable for the hook on the back of the satellite speaker. See the illustrations below.

4 mm or 1/6 inches

more than 25 mm (1 inch)

5 mm

(1/5 inches)

10 mm

(2/5 inches)

Hook on the back of the satellite speaker

2 Fasten the screws to the wall. The screws should protrude 6 to 7 mm (approx. 1/4 inches).

265 mm

(10 2/5 inches)

6 to 7 mm (approx. 1/4 inches)

3 Hang the satellite speaker onto the screws.

Align the hooks on the back of the satellite speaker to the screws, then hang the satellite speaker onto the two screws.

Started Getting
continued

7US