Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure.

This procedure can also be used to return settings you have made to their factory defaults. Use the buttons on the receiver for the operation.

1 Press ?/1 to turn off the receiver.2 Hold down ?/1 for 5 seconds.“PUSH” and “ENTER” appears in the display alternatingly.3 Press ENTER.“CLEARING” appears in the display for a while, then “CLEARED” appears.The following are reset to their factory settings.•All settings in the SPEAKER SET UP, LEVEL, TONE and CUSTOMIZE menus.•The sound field memorized for each input and preset station.•All sound field parameters.•All preset stations.•All index names for inputs and preset stations.•MASTER VOLUME –/+ is set to “VOL MIN”.

5: Setting up the speakers

You can use the SPEAKER SET UP menu to set the distance and location of the speakers connected to this receiver.

1 Press ?/1 to turn on the receiver.2 Press MAIN MENU repeatedly to select “SET UP”.3 Press or repeatedly to select the parameter you want to adjust.For details, see “SPEAKER SET UP menu parameters” below.

Note

Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings or may not be adjustable.

4 Press + or – repeatedly to select the setting you want.The setting is entered automatically.5 Repeat steps 3 and 4 until you have set all of the items that follow.
18GB