Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony HT-DDW870 56GB, AUDIO POWER SPECIFICATIONS, Sub woofer, Speaker section, Models of area code U, CA, •Center speaker (SS-CNP67), Models of other area codes

1 60

Download 60 pages, 1.86 Mb

Power consumption

Area code	Power consumption
U	170 W

CA	230 VA

CEL, CEK, AU, SP, MX,	190 W
E51

Power consumption (during standby mode)
	0.2 W
Dimensions (w/h/d) (Approx.)
	430 × 157.5 × 310 mm
	(17 × 6 1/4 × 12 1/4 inches)
	including projecting parts
	and controls
Mass (Approx.)	8.0 kg (17 lb 11 oz)

Speaker sectionModels of area code U, CA•Front speakers (SS-MSP67L/SS-MSP67R)•Center speaker (SS-CNP67)•Surround speakers (SS-MSP67SL/ SS-MSP67SR)•Surround back speaker (SS-MSP67SB)

Front/center speakers	Full range, magnetically
	shielded
Surround/surround back speakers
	Full range
Speaker units	70 mm (2 3/4 inches)
	cone type
Enclosure type	Close type
Rated Impedance	6 ohms

Dimension (w/h/d) (Approx.)

Front/surround/surround back speakers

	91 × 96 × 102 mm
	(3 1/2 × 3 3/4 × 4 inches)
Center speaker	155 × 96 × 102 mm
	(6 1/8 × 3 3/4 × 4 inches)
Mass (Approx.)
Front speaker	0.65 kg (1 lb 8 oz)
Center speaker	0.75 kg (1 lb 12 oz)

Surround/surround back speakers

0.6 kg (1 lb 6 oz)

Models of other area codes•Front speakers (SS-MSP87L/SS-MSP87R)•Center speaker (SS-CNP87)•Surround speakers (SS-MSP87SL/ SS-MSP87SR)•Surround back speaker (SS-MSP87SB)

Front/center speakers	Full range, magnetically
	shielded
Surround/surround back speakers
	Full range
Speaker units	80 mm cone type
Enclosure type	Bass reflex
Rated Impedance	6 ohms
Dimension (w/h/d) (Approx.)
Front/surround/surround back speakers
	102 × 150 × 126 mm
Center speaker	225 × 102 × 126 mm
Mass (Approx.)
Front speaker	0.8 kg
Center speaker	1.0 kg

Surround/surround back speakers 0.7 kg

Sub woofer•Models of area code CEL, CEK (SA-WMSP87E)•Models of other area code (SA-WMSP87)

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

(Models of area code U only)

With 6 ohm loads, from 28 – 200 Hz; rated 100 watts, minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output.

Speaker system	Active subwoofer,
	magnetically shielded
Speaker unit	200 mm (7 7/8 inches)
	cone type
Enclosure type	Acoustically loaded bass
	reflex

56GB

Contents

©2005 Sony Corporation WARNING About This Manual Models of area code U, CA • Receiver STR-K870P • Speaker system Table of Contents 1: Check how to hookup your components Required cords A Audio cord C Video cord D Optical digital cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks TV monitor Hooking up a Super Audio CD/CD player 1b: Connecting components with only analog audio jacks Hooking up video components 11GB 2: Connecting the antennas 3: Connecting speakers Attaching foot pads 14GB Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) SPEAKERS FRONT B Installing the speakers on the wall You can install your front, surround and surround back speakers on the wall 3 Hang the speakers on the screws 16GB 4:Connecting the AC power cord 5: Setting up the speakers SPEAKER SET UP menu parameters The initial setting is underlined xL R DIST. X.X m (Front speaker distance) xC DIST. X.X m 20GB 6:Setting up the sub woofer 7:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to FM/AM radio Storing FM stations automatically — AUTOBETICAL Presetting radio stations 1Press TUNER repeatedly to select the FM or AM band 2Press PRESET/CH/D.SKIP +/– repeatedly to select the preset station you want Using the Radio Data System (RDS) Description of program types 26GB Changing the display About the indications in the display Playback channel indicators: L C R SL SR 29GB — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Decoding the input audio signal automatically Press A.F.D. repeatedly to select “A.F.D. AUTO” Enjoying stereo sound in multi channel (2 channel decoding mode) Press A.F.D. repeatedly to select the 2 channel decoding mode The selected type of decoding appears in the display Selecting a sound field — SURR BACK DECODING How to select the surround back decoding mode When you select “SB AUTO” When you select “SB ON” When you select “SB OFF” Surround back decoding is not performed Switching the audio input mode for digital components — INPUT MODE Customizing sound fields xCTR XXX dB (Center speaker level) Resetting sound fields to the initial settings Use the buttons on the receiver for the operation 1 Press ?/1 to turn off the power 2 While holding down 2CH, press ?/1 Adjusting the tone Advanced settings xA.V.SYNC. X (Time alignment) xDEC (Digital audio input decoding priority) 38GB Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Before you use your remote Remote button description The tables below show the settings of each button continued AAP001-RMRemote the Using Operations 43GB 44GB the AAP001-RM 45GB Selecting the command mode of the remote Programming the remote The numeric codes corresponding to the component and the maker of the component To control a CD player To control a DAT deck To control an MD deck To control a tape deck To control a VCR To control a DVD player To control a TV cable box To control a satellite tuner or Page Precautions Troubleshooting Recording cannot be done •Check that the components are connected correctly •Select the source component with input buttons The FM reception is poor Remote control The remote does not function •Point the remote at the remote sensoron the receiver •Remove any obstacles in the path between the remote and the receiver •Replace all the batteries in the remote with new ones, if they are weak Specifications FM tuner section AM tuner section Video section General 55GB Speaker section Models of area code U, CA •Front speakers (SS-MSP67L/SS-MSP67R) •Center speaker (SS-CNP67) 56GB Supplied accessories 57GB List of button locations and reference pages Index Sony Corporation