Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony HT-DDW870 Selecting the command mode of the remote, 46GB, Selecting the command mode, To check the command mode of the remote, To reset the remote to factory settings

1 60

Download 60 pages, 1.86 Mb

Remote	Operations	Function
Button

O qa	VCD player/	Returns to the
	LD player/	previous menu or
	DVD player/	exits the menu.
	Blu-ray disc
	recorder/Hard
	disc recorder/
	PSX/Satellite
	tuner

V/v qa	Receiver	Selects a menu item.

B/b qa	Receiver	Adjusts or changes the
		setting.

V/v/B/b qa	VCR/	Selects a menu item.
	DVD player/
	Blu-ray disc
	recorder/Hard
	disc recorder/
	PSX/Satellite
	tuner

Notes

•The AUX, MULTI CH and 12 buttons on the remote are not available for receiver operation.

•Some functions explained in this section may not work depending on the model.

•The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.

•When you press input buttons (VIDEO1, VIDEO2, VIDEO3 or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV.

•To activate the buttons with orange printing, press ALT first before pressing the buttons.

Selecting the command mode of the remote

Set the remote command mode using the RM SET UP button and the remote command mode buttons.

Selecting the command mode

You can switch the command mode (AV1 and AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. To change the command mode of the receiver, see page 53.

Press AV1 (or AV2) while holding downRM SET UP.The indicator flashes once (twice for AV2) , then the command mode switches.To check the command mode of the remotePress RM SET UP. You can check the remote by the indicator.

Mode	Indicator flashes

AV1once

AV2twice

To reset the remote to factory settingsPress ?/1, AV ?/1 and MASTER VOL – at the same time.The indicator flashes 3 times, then goes off.

46GB

Contents

©2005 Sony Corporation WARNING About This Manual Models of area code U, CA • Receiver STR-K870P • Speaker system Table of Contents 1: Check how to hookup your components Required cords A Audio cord C Video cord D Optical digital cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks TV monitor Hooking up a Super Audio CD/CD player 1b: Connecting components with only analog audio jacks Hooking up video components 11GB 2: Connecting the antennas 3: Connecting speakers Attaching foot pads 14GB Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) SPEAKERS FRONT B Installing the speakers on the wall You can install your front, surround and surround back speakers on the wall 3 Hang the speakers on the screws 16GB 4:Connecting the AC power cord 5: Setting up the speakers SPEAKER SET UP menu parameters The initial setting is underlined xL R DIST. X.X m (Front speaker distance) xC DIST. X.X m 20GB 6:Setting up the sub woofer 7:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to FM/AM radio Storing FM stations automatically — AUTOBETICAL Presetting radio stations 1Press TUNER repeatedly to select the FM or AM band 2Press PRESET/CH/D.SKIP +/– repeatedly to select the preset station you want Using the Radio Data System (RDS) Description of program types 26GB Changing the display About the indications in the display Playback channel indicators: L C R SL SR 29GB — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Decoding the input audio signal automatically Press A.F.D. repeatedly to select “A.F.D. AUTO” Enjoying stereo sound in multi channel (2 channel decoding mode) Press A.F.D. repeatedly to select the 2 channel decoding mode The selected type of decoding appears in the display Selecting a sound field — SURR BACK DECODING How to select the surround back decoding mode When you select “SB AUTO” When you select “SB ON” When you select “SB OFF” Surround back decoding is not performed Switching the audio input mode for digital components — INPUT MODE Customizing sound fields xCTR XXX dB (Center speaker level) Resetting sound fields to the initial settings Use the buttons on the receiver for the operation 1 Press ?/1 to turn off the power 2 While holding down 2CH, press ?/1 Adjusting the tone Advanced settings xA.V.SYNC. X (Time alignment) xDEC (Digital audio input decoding priority) 38GB Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Before you use your remote Remote button description The tables below show the settings of each button continued AAP001-RMRemote the Using Operations 43GB 44GB the AAP001-RM 45GB Selecting the command mode of the remote Programming the remote The numeric codes corresponding to the component and the maker of the component To control a CD player To control a DAT deck To control an MD deck To control a tape deck To control a VCR To control a DVD player To control a TV cable box To control a satellite tuner or Page Precautions Troubleshooting Recording cannot be done •Check that the components are connected correctly •Select the source component with input buttons The FM reception is poor Remote control The remote does not function •Point the remote at the remote sensoron the receiver •Remove any obstacles in the path between the remote and the receiver •Replace all the batteries in the remote with new ones, if they are weak Specifications FM tuner section AM tuner section Video section General 55GB Speaker section Models of area code U, CA •Front speakers (SS-MSP67L/SS-MSP67R) •Center speaker (SS-CNP67) 56GB Supplied accessories 57GB List of button locations and reference pages Index Sony Corporation