Other Operations

Naming preset stations and inputs

You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display.

1 To index a preset station

Press FM or AM to select the FM or AM band, then tune in the preset station you want to create an index name for (page 25).

To index an input

Press the input button to select the input you want to create an index name for.

2 Press MAIN MENU repeatedly to select “CUSTOM”.3 Press or repeatedly to select “NAME IN”.4 Press ENTER.The cursor flashes and you can select a character.5 Use or and + or – to create an index name.

Press + or – repeatedly to select a character, then press to move the cursor to the next position.

Tips

•You can select the character type as follows by pressing + or – repeatedly.Alphabet (upper case) t Numbers t Symbols

•To enter a blank space, press + or – repeatedly until a blank space appears in the display.

•If you made a mistake, press or repeatedly until the character you want to change flashes,

then press + or – repeatedly to select the correct character.6 Press ENTER to store the index name.Note (Models of area code CEL, CEK only)

When you name an RDS station and tune in the station, the Program Service name appears instead of the name you entered. (You cannot change the name of a Program Service name. The name you entered will be overwritten by the Program Service name.)

Operations Other
39GB