Press control button V/v repeatedly to select “T. TONE”.
Press AMP MENU. “1-LEVEL” appears on the display.

8:Adjusting the speaker levels and balance

(TEST TONE)

You can adjust the speaker levels and balance while listening to the test tone from your listening position.

Tip

The receiver employs a test tone with a frequency centered at 800 Hz.

H X x

TOP MENU/

MUTING

GUIDE

AV MENU

F MASTER VOL

2-5

G

g

 

 

 

 

f

 

MASTER

 

 

 

VOL +/–

 

 

O

 

 

DISPLAY

RETURN/EXIT

 

 

 

 

TV/

AMP

1

 

TV VOL

TV CH VIDEO

MENU

 

 

WIDE

AUTO

 

 

 

CAL

 

1

2 Press the control button or control button b to enter the menu.

3

4 Press the control button or control button b to enter the parameter.

5 Press control button V/v repeatedly to select “T. TONE Y”.

The test tone is output from each speaker in sequence as follows:

Front left t Center t Front right t Surround right t Surround left t Sub woofer

6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker.

For details, see “Adjusting the level (LEVEL menu)” (page 41).

Tips

•To adjust the level of all speakers at the same time, press MASTER VOL +/–. You can also use MASTER VOLUME on the receiver.

•The adjusted value are shown on the display during adjustment.

7 Repeat step 1 to 5 to select “T. TONE N”.

The test tone turns off.

Note

The test tone does not work when MULTI CH IN is selected.

Started Getting

33US