Settings for the tuner

(TUNER menu)

You can use the TUNER menu to set the FM station receiving mode and to name preset stations.

Select “4-TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 38) and “Overview of the menus” (page 39).

TUNER menu parameters

xFM MODE (FM station receiving mode)

•FM AUTO

This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo.

•FM MONO

This receiver will decode the signal as mono signal regardless of the broadcast signal.

xNAME IN (Naming preset stations)

Lets you set the name of preset stations. For details, see “Naming preset stations” (page 55).

Settings for the audio

(AUDIO menu)

You can use the AUDIO menu to make settings for the audio to suit your preference.

Select “5-AUDIO” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 38) and “Overview of the menus” (page 39).

AUDIO menu parameters

xDEC. PRI. (Digital audio input decoding priority)

Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks.

•DEC. AUTO

Automatically switches the input mode between DTS, Dolby Digital, or PCM.

•DEC. PCM

PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound depending on the format. In this case, set to “DEC. AUTO”.

Note

When set to “DEC. AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “DEC. PCM”.

Operations Amplifier

continued

43US