Error and warning codesError codes

When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows:

Error code t blank display t (error code t blank display)a) t PUSH t blank display

tENTER

a)Appears when there are more than one error code.

To rectify the error

1Record down the error code.

2Press RECEIVER.

The RECEIVER indicator lights up and receiver operation is activated.

3Press .

4Press ?/1 to turn off the receiver.

5Rectify the error.

For details, see “Error codes and remedies” below.

6Turn on the receiver and perform Auto Calibration again (page 32).

Error codes and remedies

Error

Explanation

Remedy

code

 

 

 

 

ERROR 10

The environment Make sure the

 

is too noisy.

environment is

 

 

quiet during Auto

 

 

Calibration.

 

 

ERROR 11 The speakers are

Place your speakers

 

placed too near

further away from

 

the optimizer

the optimizer

 

microphone.

microphone.

 

 

 

ERROR 12

None of the

Make sure that the

 

speakers are

optimizer

 

detected.

microphone is

 

 

connected properly

 

 

and perform Auto

 

 

Calibration again.

 

 

 

ERROR 20

Front speakers

Check the front

 

are not detected

speakers

 

or only one front

connection.

 

speaker is

 

 

detected.

 

 

 

 

Error Explanation Remedy code

ERROR 21 Only one

Check the surround

Getting

 

surround speaker speakers

 

is detected.

connection.

 

 

 

Started

Warning codes

 

 

 

During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows:

Warning code t blank display t (warning code t blank display)b) t PUSH t blank display t ENTER

b)Appears when there are more than one warning code.

You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually.

To change the settings manually

1Record down the warning code.

2Press RECEIVER.

The RECEIVER indicator lights up and receiver operation is activated.

3Press .

4Press ?/1 to turn off the receiver.

5Follow the solution provided in the “Warning codes and solutions” below.

6Turn on the receiver and perform Auto Calibration again (page 32).

continued

33US