There is severe hum or noise.

•Check that the speakers and components are connected securely.

•Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light.

•Move your audio components away from the TV.

•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

There is no sound, or only a very low- level sound is heard from the center/ surround speakers.

•Select a CINEMA STUDIO EX mode (page 52).

•Adjust the speaker level (page 34).

There is no sound from the sub woofer.

•Check that the sub woofer is connected correctly and securely.

•Make sure you have turned on your sub woofer.

The surround effect cannot be obtained.

•Make sure the sound field function is on (press MOVIE or MUSIC).

•Sound fields do not function for signals with a sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is not reproduced.

•Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.

•When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.

Recording cannot be carried out.

•Check that the components are connected correctly.

•Select the source component using the input buttons (page 36).

Video

There is no picture or an unclear picture appears on the TV screen.

•Select the appropriate input using the input buttons.

•Set your TV to the appropriate input mode.

•Move your audio components away from the TV.

•Assign the composite video input to DMPORT input correctly.

•Depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.

The source image input to the HDMI jack on the receiver is not output from the TV.

•Check the HDMI connection.

•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.

Recording cannot be carried out.

•Check that the components are connected correctly.

•Select the source component using the input buttons (page 36).

74US