• Sub woofer
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)
With 6 ohm loads, from 28 – 200 Hz; rated 120 watts, minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
Speaker system | Active subwoofer, |
| magnetically shielded |
Speaker unit | 7 7/8 inches (200 mm) |
| cone type |
Enclosure type | Acoustically loaded bass |
| reflex |
RMS output | 200 W |
Input | LINE IN (input pin jacks) |
Power requirements |
|
|
|
Area code | Power requirements |
|
|
U, CA | 120 V AC, 60 Hz |
|
|
Power consumption |
|
|
|
Area code | Power consumption |
|
|
U, CA | 80 W |
| |
Dimensions (width/height/depth) (Approx.) | |
| 10 3/4 × 13 1/8 × 15 inches |
| (270 × 331 × 380 mm) |
Mass (Approx.) | 18 lb 5 oz (8.3 kg) |
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Monaural audio cord (1)
Speaker cords
•Long (2)
•Short (3)
Coaxial digital cord (1)
Foot pads
•Speakers (20)
•Sub woofer (4)
Remote commander
Optimizer microphone
For details on the area code of the component you are using, see page 3.
Design and specifications are subject to change without notice.
78US