Performing Initial Setup Operations

System Speaker the Up Setting and Up Hooking

Once you have made speaker connections and have turned on the power for the first time, clear the amplifier’s memory. After you have done this, set the speaker sizes, speaker locations and other initial system settings that are necessary.

Clearing the amplifier’s memory

Before you use your amplifier for the first time or when you want to clear the amplifier’s memory, do the following.

If the Demonstration appears when the power is turned on, this procedure is not necessary.

?/1

 

VIDEO

TV

DVD

AUX

5.1CH/SAT

MASTER VOLUME R

?/1

SET UP

 

 

 

 

 

SURR LEVEL

 

 

 

 

 

–

+

 

 

 

 

 

 

 

 

 

 

–

+

SOUND FIELD MODE

Setting up the amplifier

Before you use your amplifier for the first time, use the SET UP button to adjust settings to correspond to your system. You can set the following items. For details on how to adjust each setting, see the page in parentheses.

•Set the speaker size (page 15).

•Set the speaker distance (page 17).

1Turn off the amplifier.

2Hold down ?/1 for four seconds.

The currently selected function, then the demonstration message appears in the display and the items including the following are reset or cleared:

•All sound field parameters are reset to their factory settings.

•All adjustments made with the SET UP button are reset to their factory settings.

•The sound field memorized for each program source is cleared.

14